Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control Crodpsyug R Refx Acvja enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs Crsdpfx Aoyug Hxscvja • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), DEMAG Chain Hoist Type PK 2N-F Stock number (1221) Lifting capacity 500 kg Credpfoyy S Tijx Acvea 2 lifting speeds: 5/1.25 m/min. 380 Volt 2.2 / 1.5 Ampere Lifting height 4.5 meters

Condition: used, Year of construction: 2019, functionality: fully functional, input frequency: 50 Hz, Complete Fuel Polishing & Storage System – 130,000 L Capacity Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Independently controlled via front-panel PLC Operational indicators and flow meters (L/h) Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Underground Diesel Storage Tanks (x4) Total capacity 130,000 litres Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Designed for safe and precise operation Crsdpfxew Hdg Ue Acvsa External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.

Condition: excellent (used), electric motor, three-phase motor Credpfx Acsb A Sk Eovoa -Engine: unused -Power: 18.5 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Design: B3/B5 -Protection class: IP 55 -Quantity: 6 pieces available -Price: per piece -Weight: 110 kg/piece

Condition: good (used), Year of construction: 2012, winch, lifting winch, construction winch, anchor winch -mechanical winch -Holding force: 300 kN -with: freewheel and mechanical brake -Drum: Ø mm -Operation via: hand lever -2x winches available: 1x left, 1x right -Price: per piece Cjdpfxod S Ap Ds Acvora -Dimensions: 1140/750/H1120 mm -Weight: 760 kg/piece

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: 32 mm -Piston rod: Ø 14 mm -Eye diameter: 12 mm -Stroke: 200 mm -Dimensions: 130/70/H405 mm Cedjdv D E Dspfx Acvjra -Weight: 3 kg

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Ziehl-Abegg, axial fan -Type: EA 420/4 -Power: 0.45 kW / 1300 rpm -Voltage: 220 V Crjdpfx Acsuqq Nuovea -Bolt circle: 115 mm -Number: 4 fans available -Price: per piece -Dimensions: Ø 420 x 135 mm -Weight: 6.2 kg/pc.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 100 mm -Piston rod: Ø 70 mm -Stroke: 1070 mm -Piston rod mounting: Ø 75 mm -Cylinder mount: Ø 60 mm -Ideal for building a hydraulic press -Usable: universal Crjdpob A Rr Rofx Acvoa -Dimensions: 1800/200/H120 mm -Weight: 110 kg

Condition: ready for operation (used), * Brand: Warman Codpfxjyxma Is Acvjra * Type: 6/4 HH * Inlet: ∅ 150 mm * Outlet: ∅ 110 mm.

Condition: ready for operation (used), * Brand: Warman * Type: 10/8 * Input: ∅ 230 mm , Output: ∅ 210 mm. Codoyxl S Nopfx Acvora * Driving: 55 kW E-motor.

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 Cedpsxzqp Ajfx Acvera -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Condition: used, Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: the switching elements are missing -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg Crjdpfx Ajxzq Sqecvja

Condition: good (used), Guide unit for pneumatic cylinders, air cylinders, standard cylinders Codpefxg Nujfx Acvora -Manufacturer: Festo, FEN control unit... -Type: FEN.... -X-S1-SA see image of type plate -Stroke: approx. 200 mm -Bore: for piston Ø 48 mm -Dimensions: 465/190/H105 mm -Weight: 14.2 kg

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 54 rpm -Power: 0.25 kW -Design: B5 angle -Shaft diameter: 25 mm -Protection class: IP 44 -Outer flange: Ø 160 mm -Recess: Ø 110 mm Csdoc R R Ayopfx Acvera -Number: 1x motor available -Price: per piece -Dimensions: 390/200/H200 mm -Weight: 21 kg/piece

Condition: good (used), Geared motor, electric motor, electric geared motor Cjdpfxjc U Tz Aj Acvsra -Speed: 50 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: 28 mm -Protection class: IP 54 -Outer flange: Ø 160 mm -Recess: Ø 110 mm -Price: per piece -Quantity: 2 available -Dimensions: 405/160/H215 mm -Weight: 14.2 kg

Condition: good (used), geared motor, electric motor -Speed: 44 rpm -Power output: approx. 0.25 kW -Design: B5 angle -Shaft diameter: Ø 25 mm -Outer flange diameter: Ø 140 mm -Recess: Ø 95 mm -Protection rating: -Number: 1x motor available -Price: per piece -Dimensions: 390/200/H170 mm -Weight: 14.5 kg Cjdpfxsc Uz H Is Acvsra

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank Crjdpjb A I Sxsfx Acvoa -Number: 4x units available -Price: per piece -Weight: 95 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump Codpfx Acod S D Dksvera -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm -Weight: 334 kg

Condition: good (used), Three-phase motor, electric motor -Power: 21 kW -Speed: 1465 rpm -2x shaft: Ø 48 mm -Construction: B3 -Protection class: IP 44 Crjdpfx Acoct Ernjvea -Dimensions: 800/400/H345 mm -Weight: 160 kg

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations Csdpfeyx Dfnex Acvsra -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar Crjdpfx Aoyx Ddqscvea -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers Credoyx Ap Sopfx Acvja -Conveyor belt roller: Transport roller -Roll: Ø 100 x 1800 mm -Shaft: Ø 23 x 200 mm -Quantity: 3x transport rollers available -Price: per piece -Dimensions: Ø 100 x 2200 mm -Weight: 13 kg/pc.

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers Cedpfx Aceyx An Uevsra -Conveyor belt roller: Transport roller with bearing block and drive wheel -Roll: Ø 99 x 1800 mm rubberized -Shaft: Ø 35 x 200 mm -Dimensions: 2200/200/H150 mm -Weight: 31 kg

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, cardboard roll carrier, transport roller, carrying roller -Transport trolley: with cutting device -Roll: Ø 327 x 1800 mm rubberized -Shaft: Ø 50 x 415 mm -Drive shaft/mount: Dimensions see photos -Dimensions: 2355/520/H327 mm -Weight: 286 kg/unit Crjdpfxsyx Agwj Acvsa