Condition: excellent (used), Wire Straightening Devices for Wire and Rods Most units are from the manufacturer Witels Albert, but there are also other brands available. Hfodpfx Asxnryisacen The smallest straighteners are suitable for wire diameters of 0.5 – 0.8 mm, with the largest accommodating up to approximately 16 mm. All devices have been inspected and are clean. I am selling these at approximately 50 – 60% of the original price.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M14I/9064, Offer Number: M14I/9064 Machinetype: thread rolling machine - flat die Make: MENN Type: GW62 Constr. year: 1974 Hsdpfoxnytqex Aacefn diameter range: 3-8 mm shaft length under head: 80 mm max. thread length: 55 mm output pieces/min: 300 Location: Germany

Condition: excellent (used), Year of construction: 1988, wire diameter range: 1,5 - 7,0 mm cutting length: up to 1.000 mm wire feeding speed: 29 - 90 mtr./min Hfsdpjmt A Svsfx Aacjn

Condition: used, Year of construction: 1968, Hilgeland ME2 VM trimming press for sale. Hfjdpfx Aeur N Ewsacjn

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 25227, conveyor belt width: 60 mm, punching force: 7 t, Two Bihlers are for sale. Price per piece Hfedev Nv Dlepfx Aacsn A reel is available if needed.

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Hsdpowz R Iujfx Aacjfn Freight basis: ex-works

Condition: excellent (used), Monitoring Solution for Multistation Header and Boltmaker Process monitoring for cold forming, e.g. for multi-stage presses and for screw presses (boltmakers) Schwer+Kopka SK5 devices detect process faults, protect the machine and mould from overloading, improve the quality of the parts produced and help operators to set up the machine more quickly. In the event of production problems (e.g. mould breakage or ejection errors), they switch off the machine at an early stage to prevent costly consequential damage to the machine and mould. The system is complete. A total of 2 pieces available. Hjdjxfzmmopfx Aacjfn

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M14I/9063, Offer Number: M14I/9063 Hodpfxjxnyrto Aacefn Machinetype: thread rolling machine - flat die Make: HILGELAND Type: FL-10-80 Constr. year: 1985 diameter range: 10 mm shaft length under head: 180 mm max. thread length: 80 mm output - pieces/min: 400 Location: Germany

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Hjdpfx Aajwt N Uqecefn More pictures and data will follow shortly.

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 Hfodpfx Aaour N Daocsn The machine is ready for immediate use!

Condition: refurbished (used), Year of construction: 2025, working width: 2,450 mm, Refurbished Schlatter MG903 - ZG24 - Longitudinal wire insertion LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mat extraction MVL4.2 Hedpfx Ajv Ed Ansacofn - De-stacker MS12 Control and power cabinet - Siemens S7 TIA machine control Mesh size : 2450mm Wire: 2-12mm

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: D12L/8393, Offer Number: D12L/8393 Machinetype: wire nail press Make: WAFIOS Type: N41 Constr. year: 1987 Hfodpfxsxnykpe Aacjn diameter range: 1,8-3,4 mm nail length: 13-80 mm output - pieces/min: 550 Location: In our warehouse

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, wire diameter (max.): 12 mm, type of input current: AC, Machine Overview: Schlatter MG900 MG12 Mesh Welding Machine - "Offical Expose upon request" The Schlatter MG900 is a powerful and refurbished resistance welding machine, specifically designed for the production of wire mesh panels. With a width capacity of up to 1250 mm and a length of 3000 mm, it handles wire diameters of up to 12 mm. This machine has undergone extensive modernization to deliver maximum efficiency and flexibility in production. Main Components • LV - Longitudinal Wire Feeder o Upgraded with a high-precision servo axis o Hopper magazines for longitudinal wires up to 3000 mm • MG12.4 - Mesh Welding Unit o Equipped with 3 to 6 transformers. o Up to 12 Schlatter welding presses with a capacity of 5 kN •QFD34 - Cross Wire Feeder o Allows for double cross wire insertion for two different cross wire diameters / length, *Note: The second level is not yet installed in the photos • MVL - Mesh Extraction Unit o Controlled by a new MS2N Servo Motor from Bosch Rexroth CrtlX Hedpfx Aevtg Sbjacjfn o Equipped with four Schlatter mesh grippers (expandable upon request) • MS - Mesh Stacker o Automatically stacks mesh panels with a travel path of up to 3100 mm • Control and Power Cabinet o Siemens S7 TIA Control System o Rexroth CrtlX Components for high-dynamic motion control Specs: • Mesh Width (Transverse Wire Length) max. 1250mm / min. 200mm • Mesh Length (Manual Loading) max. 3200mm / min. 300mm • Distance Between Outer Longitudinal Wires max.1200mm • Longitudinal Wire Spacing 20 - 150mm • Cross Wire Spacing min. 12.5mm • Longitudinal Wire Diameter 2.0 - 10.0mm • Transverse Wire Diameter 2.0 - 8.0mm • Maximum Number of Longitudinal Wires max.24

Condition: used, functionality: fully functional, machine/vehicle number: D08E/8404, Offer Number: D08E/8404 Machinetype: straightening and cutting machine Info: overhauled Make: WAFIOS Type: R5 Constr. year: diameter range: 6-14 mm cutting length: 6000 mm speed - meters/min: 23 - 90 Hfodpfx Aoxnykcjacon Location: Europe

Condition: used, functionality: fully functional, machine/vehicle number: D32L/8410, Offer Number: D32L/8410 Machinetype: spring coiling machine Hfsdpjxnyi Eofx Aacsn Make: WAFIOS Type: FS3 Constr. year: wire diameter: 0,2-1,8 mm spring diameter: 35 mm feeding length: 1.500 mm feed length: Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D32L/8405, Offer Number: D32L/8405 Machinetype: spring coiling machine Hfedpfxexnyixe Aacen Make: WAFIOS Type: ZO1 Constr. year: wire diameter: 0,1-0,5 mm spring diameter: 1-5 mm feeding length: 1000 mm output - pieces/min: 70 Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D32L/8411, Offer Number: D32L/8411 Machinetype: spring coiling machine Make: WAFIOS Type: FS2 Constr. year: Hedpfjxnyifex Aacjfn wire diameter: 0,2-0,9 mm spring diameter: 1 - 20 mm feeding length: 4 - 1280 mm output pieces/min: 11 - 420 Location: In our warehouse

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D56L/8403, Offer Number: D56L/8403 Hedpfx Aajxnyh Iocefn Machinetype: packing machine Make: WEIGHPACK Type: Constr. year: 1994 working range: Location: In our warehouse

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M06L/7593, Offer Number: M06L/7593 Machinetype: double blow header Make: PELTZER-EHLERS Type: DKP16 Constr. year: 1972 Hedpfx Aswi S Swsacofn diameter range: 8-16 mm shaft length under head: 25-180 mm max. cut-off length: 220 mm output - pieces/min: 70 Location: In our warehouse

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M08L/9039, Offer Number: M08L/9039 Machinetype: 6 die - 6 blow transfer header Hfedpfx Aew N Dl Uoacen Info: bushing cut-off Make: Carlo Salvi Type: 663/TR Constr. year: 2007 diameter range: 2-5 mm number of dies: 6 number of stations (incl. cut off): 7 cutting length: 35 mm shaft length under head: 25 mm output - pieces/min: 400 dimensions: 12x35 press power: 15 to Location: In our warehouse

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08E/9059, Offer Number: M08E/9059 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: KIESERLING Type: K55 Constr. year: 1979/2002 diameter range: 8-22 mm number of dies: 5 number of stations (incl. cut off): 6 output - pieces/min: 105 Hfodpexlr I Ijfx Aacsn shaft length under head: 6-140 mm cutting length: 175 mm press power: 250 to Location: Europe

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M20L/6436, Offer Number: M20L/6436 Machinetype: rivet header Make: Carlo Salvi Type: RF/SV Constr. year: 1974 diameter range: 0,8-3,0 mm cutting length: 30 mm shaft length under head: 25 mm Hedoxlr E Tjpfx Aacjfn output - pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1978, functionality: fully functional, machine/vehicle number: M10E/8915, Offer Number: M10E/8915 Machinetype: boltmaker 4 die 4 blow Info: bushing cut-off Make: NEDSCHROEF Type: BMV 7 Constr. year: 1978 diameter range: 16-27 mm number of dies: 4 number of stations: 7 Hfodpfx Aaswi Tycecsn cutting length: 50-240 mm shaft length under head: 30-180 mm range of thread length: 95 mm max. width acros flats: 24-41 mm output - pieces/min: 84 press power: 420 t Location: Europe

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08L/9030, Offer Number: M08L/9030 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SCHULER Type: GB15-5 Constr. year: 1988 diameter range: 8-18 mm number of dies: 5 number of stations (incl. cut off): 6 shaft length under head: 120 mm cutting length: 140 mm output - pieces/min: 60-170 press power: 100 to Hodpexgt N Njfx Aacsfn Location: In our warehouse

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M30E/9003, Offer Number: M30E/9003 Machinetype: cold nut former Make: SAN SHING Type: SS-C-NF-14B-5S Hfedpowi T Uyefx Aacjn Constr. year: 1997/2003 diameter range: M6-M8 number of dies: 5 number of stations (incl. cut off): 6 cutting length: 12 mm output - pieces/min: 320 press power: 85/90 to Location: Europe