Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 51 mm, turning length: 102 mm, drilling depth: 102 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum turning length: 102 mm Maximum drilling depth: 102 mm Maximum round bar diameter: 51 mm Maximum square bar diameter: 36 mm Maximum hexagon bar diameter: 44 mm Maximum octagon bar diameter: 47 mm Spindle drum diameter: 340 mm Psdpoy R R Nwefx Ahljpt Standard bar feed: 125 mm Special bar feed: 290 mm Standard longitudinal slide travel, total: 125 mm Standard longitudinal slide travel, working stroke: 100 mm Special longitudinal slide travel, total: 160 mm Special longitudinal slide travel, working stroke: 125 mm Upper cross slide travel, total: 60 mm Upper cross slide travel, working stroke: 36 mm Middle cross slide travel, total: 60 mm Middle cross slide travel, working stroke: 36 mm Lower cross slide travel, total: 70 mm Lower cross slide travel, working stroke: 44 mm Maximum material pass-through: 51 mm Maximum material feed: 125 mm MACHINE DETAILS Coolant capacity: 660 l Pump capacity: 170 l/min EQUIPMENT Thread cutting device Right-hand threading via undercut Electric submersible pump Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, fixtures, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum material passage: 32 mm Maximum material feed: 125 mm Turning speed: 200–3,150 rpm Thread cutting speed (right-hand): 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & weight: Space required: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Current type: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Ppsdpfxsy R R Ige Ahlst Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulation oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Fixtures Additional accessories

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Ppodpfsy R Rutsx Ahlst Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides Podpfx Ahjy R Rqbolopt 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! Ppsdpfxey R Rnyo Ahlst The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min Ppodpfx Ahey R Rm Aslot EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, see below! TECHNICAL DETAILS Maximum material passage: 32 mm Maximum material feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Turning speed: 200–3,150 rpm Thread cutting speed (right-hand): 11.2–1,575 rpm Thread cutting device: Right-hand thread by underspinning Podpey R Rkuefx Ahlept MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Current type: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Ppsdey R Rcwopfx Ahlot Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Ppodpoy R N Ulofx Ahlot Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Ppodpfx Ahey R N I Eolet Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Spindle circle diameter: 270 mm Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 Psdoy R Nx Djpfx Ahlopt MACHINE DETAILS Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 33,749 h, machine/vehicle number: A1240A0497, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Travel Range X-Axis: 4,000 mm Travel Range Y-Axis: 2,000 mm Travel Range Z-Axis: 115 mm Maximum Workpiece Weight: 1,700 kg Maximum Speed: 140 m/min Positioning Accuracy Positioning Deviation Pa: 0.1 mm Average Positioning Accuracy Ps: 0.03 mm Laser Data Maximum Laser Power: 4,000 W Wavelength: 10.6 µm Sheet Thickness Mild Steel: 25 mm Sheet Thickness Stainless Steel: 15 mm Sheet Thickness Aluminum: 10 mm MACHINE DETAILS Control: CNC Sinumerik 840D SL Total Power Consumption: 11–65 kW Beam-On Time: 19,152 h (as of 28.08.2025) Laser-On Time: 33,749 h (as of 28.08.2025) Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine Weight: 14,000 kg EQUIPMENT Automatic longitudinal pallet changer Longitudinal chip conveyor Oil vaporizer PierceLine FocusLine NitroLine PlasmaLine TruFlow 4000 CO2 laser with optimized standby mode Maintenance-free radial turbine High frequency excitation TASC laser control Laser power control Laser logbook LensLine with status monitoring Cutting head with 250 mm focal length Quick-change cutting head device (UTI) ControlLine Lens with RFID chip ContourLine Micro-welding FastLine AdjustLine Pedpey Rqngofx Ahljpt Internet remote services FlyLine Easy workshop programming

Condition: ready for operation (used), Year of construction: 2005, operating hours: 28,246 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,600 mm, table load: 20,000 kg, overall weight: 28,000 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,000 mm Z-axis travel: 1,600 mm B-axis: 360° C-axis: 360° Ppjdpfx Aey R Dpkshljt Spindle taper: SK 50 Rotary table (L x W): 2,500 x 2,000 mm Table load capacity: 20,000 kg Tool magazine: 100 pcs. MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 7,300 x 7,700 x 4,350 mm Machine weight: 28,000 kg Operating hours Operating hours: 75,377 h Spindle hours: 28,246 h EQUIPMENT H- / V- head

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,859 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,500 mm Number of stations: 90 Head and rotary table: 1,600 x 1,450 mm MACHINE DETAILS Control type: CNC Podpfxey R Dnas Ahlept Control: Heidenhain Operating hours Control on-time: 106,253 h Machine on-time: 93,170 h Program runtime: 41,859 h

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, total length: 4,000 mm, total width: 800 mm, total height: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Number of trolleys: 3 Various manufacturers Dimensions per trolley (L x W): Pedpfx Ajy D T E Ijhlopt 1,200 x 750 mm 1,000 x 500 mm 1,000 x 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 800 x 1,300 mm Weight: 400 kg External reference: 55

Condition: not inspected (used), functionality: unexamined, power: 2.5 kW (3.40 HP), overall weight: 1,000 kg, table length: 350 mm, table width: 200 mm, No reserve price – guaranteed sale to the highest bidder! Placement of a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Table dimensions: 350 mm x 200 mm MACHINE DETAILS Connection: 2.5 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,100 x 2,200 mm Machine weight: 1,000 kg EQUIPMENT Suitable workbench with various copper electrodes Two-axis digital display (Manufacturer: HEIDENHAIN) External reference: 30 Ppsdpey D T Ehofx Ahlet

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 283, overall weight: 300 kg, table width: 400 mm, table length: 600 mm, rotational speed (min.): 250 rpm, rotational speed (max.): 1,600 rpm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Speed range: 250 – 1,600 rpm Table dimensions: 600 x 400 mm MACHINE DETAILS Ppjdpfx Ahjy D T A Hslot Dimensions & weight Dimensions (L x W x H): 800 x 700 x 1,500 mm Machine weight: 300 kg EQUIPMENT Honing stones Collets External reference: 12

Condition: not inspected (used), Year of construction: 1970, functionality: unexamined, machine/vehicle number: 5206, grinding wheel diameter: 240 mm, table length: 450 mm, table width: 250 mm, power: 6.08 kW (8.27 HP), input voltage: 380 V, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the period from 23.06.2026 to 26.06.2026! Podpsy D Tvtjfx Ahlspt TECHNICAL DETAILS Magnet dimensions: 450 x 250 mm Grinding wheel diameter: 240 mm MACHINE DETAILS Operating voltage: 380 V Connection: 6.08 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,500 x 2,000 mm Machine weight: 1,000 kg EQUIPMENT Side table Suitable accessories Magnets Three-jaw chuck Vice (jaw width: 60 mm) External reference: 21

Condition: not inspected (used), functionality: unexamined, table length: 1,700 mm, table width: 500 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely pickup between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Number of workbenches: 4 Surface dimensions: 1,700 x 500 mm Dimensions per workbench: 1,500 x 730 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,100 x 2,700 mm Weight: 1,500 kg EQUIPMENT • Welding positioner (Manufacturer: RÖHM) • Balancing scale • Sheet metal cutting device (cutting length: 100 mm) • Collets • Arbor press • Electric engraver • Vice (jaw width: 150 mm) • Abrasives • Sandpaper • Sheet metal shears (Manufacturer: FEIN) • Screws • Drill bits • Number punches Ppodpfxoy D Tuve Ahljt • Heavy-duty rack without contents External Reference: 25

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 23/06/2026 and 26/06/2026! Auction of two decoilers, one of which is an EOC V 1000 AE-S (2001) TECHNICAL DETAILS Diameter: approx. 1,200 to 1,500 mm MACHINE DETAILS Ppjdpfx Ahsy D Tlnjlst Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,800 mm Weight: 600 kg External reference: 69

Year of construction: 1970, condition: not inspected (used), functionality: unexamined, overall weight: 2,000 kg, total length: 3,000 mm, total width: 1,200 mm, total height: 1,500 mm, machine/vehicle number: 779, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Diameter: 5.4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,200 x 1,500 mm Machine weight: 2,000 kg Ppodpfxoy D Tkds Ahljt External reference: 40

Condition: not inspected (used), functionality: unexamined, pressing force: 50 t, stroke length: 40 mm, overall weight: 3,000 kg, rotational speed (max.): 500 rpm, rotational speed (min.): 100 rpm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Pressing force: 50 t Ppodpfxsy D Thpo Ahlot Ram stroke: 16 - 40 mm Flywheel speed range: 100 - 500 rpm Decoiler diameter: 1,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,000 x 2,200 mm Machine weight: 3,000 kg External reference: 43

Condition: not inspected (used), functionality: unexamined, grinding wheel diameter: 100 mm, overall weight: 100 kg, total height: 1,500 mm, total length: 600 mm, total width: 500 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Grinding wheel diameter: 100 mm Ppjdjy D Tfnspfx Ahlet MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 500 x 1,500 mm Weight: 100 kg EQUIPMENT Matching drawer cabinet with additional grinding wheels and drill bits External reference: 24

Condition: not inspected (used), Year of construction: 1958, functionality: unexamined, machine/vehicle number: 202, wheel diameter: 885 mm, production capacity: 4,200 unit/h, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Maximum bolt diameter: 7.7 mm Maximum thread: M8 Maximum shank length: 90 mm Minimum shank length: 20 mm Output: approx. 35/53/70 pcs/min Flywheel diameter: 885 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 1,500 mm Machine weight: 2,500 kg External reference: 42 Pjdpfsy D Tfhex Ahlopt

Condition: not inspected (used), Year of construction: 1968, machine/vehicle number: 7282, functionality: unexamined, pressing force: 25 t, controller model: SIEMENS SIMATIK, ram adjustment: 50 mm, stroke adjustment: 75 mm, stroke rate (max.): 110 1/min, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Press force: 25 t Stroke adjustment: 5 – 75 mm Ram adjustment: 50 mm Ram strokes: 110/min MACHINE DETAILS Control model: SIEMENS SIMATIK PLC Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,500 x 2,000 mm Machine weight: 3,000 kg EQUIPMENT Ppjdpfjy D Tctex Ahlet Rotary indexing unit with 5 stations Automation system (manufacturer: PÜSCHEL) Two vibratory bowl feeders External reference: 23