Used storage tanks for sale (257)

Condition: good (used), Fuel storage tank, 20 m³ Psdpfx Ajyr Tdfehlept

Condition: excellent (used), 50 stainless steel storage tanks for chemicals, 1.8 m3 capacity, in very good condition. Ppjdpfx Ahjy U Azaelet

Condition: used, Unused from new Caldereria Teruel (Spain) approximately 1,000 litre 316L stainless steel IBC. Internal measures approximately 1110mm diameter X 1230mm straight side. Mounted on stainless steel forkliftable base. Hinged manway lid on top dish with fast release clamp. 40mm side bottom discharge with valve. In stock and immediately available. Specifications: Psdpfx Ahsyh I Tqjlept Material Grade: 316L Stainless Steel Dimensions: 1110mm diameter X 1230mm straight side

Condition: used, tank capacity: 160,000 l, ITEM: AV-12025 – VERTICAL TANK 160 M3 External dimensions: Diameter Ø 3900/4050 mm, Total Height 16000 mm. Vertical, insulated stainless steel tank – 1 unit. Insulated with 50 mm and finished with aluminum trapezoidal plates. Conical bottom, 30 degrees. Pjdpfx Ahoy U Hbqolspt Conical top, 15 degrees. Top-mounted agitator. Cooling/heating jacket. AISI 316

Condition: excellent (used), Year of construction: 2024, 100 units of mesh decks, 1 ton per pallet position, for pallet racking 1.20m deep – New: Price per unit ex works: now only €9 instead of €20 (net)! Only available as a complete lot! Ppodsttu Sgspfx Ahlot Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent from rack beams Uniformly distributed load (UDL) (kg): 1000 Permissible deflection (mm): 7.3 Load at structural failure (kg): 2000 Features: - ANSI MH 26.2 - 2017 compliant - Made in Germany - Pre-galvanized, hemmed support channels - SafeEDGE® on mesh and support channels - Mesh offers over 70% open area - EU Design Registration No. 002435099-0003 Specifications: Beam type: Box beam 50 Racking depth (mm): 1200 Mesh depth (mm): 1202 Mesh width (mm): 879 Pitch upper wire (mm): 25 Pitch lower wire (mm): 100 Upper wire diameter (mm): 4 Lower wire diameter (mm): 5 Support channel thickness (mm): 1.2 Number of support channels: 5 Finish: Pre-galvanized Weight (kg): 12.24 Front: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward Rear: - Deflection (mm): 30 - Deflection type: External - Deflection direction: downward

Condition: used, Item: AV-12253-50T-Vertical External dimensions: Diameter Ø 3400 mm, total height 7000 mm. Psdoy Tx Elspfx Ahlopt Vertical, stainless steel tanks – 3 units. Insulated with 100 mm. Side-mounted agitator and CIP system. Brand: Wedholm. AISI 304.

Condition: good (used), Item: D-6058-tank 1.500 Stainless steel tank, Vertical Ppjdpfx Ash Hrhrjhlet capacity 1.500 L, standing, single skin, manhole at front. AISI 304. Used for CIP water!

Condition: used, Year of construction: 1992, Technical details: Ppodpfx Aeu Nz I Tshlot max. temperature: 120 °C internal diameter: 980 mm internal length : 2580 mm external diameter: 1500 mm external diameter : 2740 mm wall strength: ca. 6,5 mm content: ca. 2000 l weight: 1425 kg Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the execution of the steam sterilization process, not to the pressure resistance of the container. - Permissible operating temperature 120 °C *

Condition: good (used), Item: AV-11777-Vertical-Tank 4000L Vertical Insulated Stainless Steel Tanks 4.000 L/each Exterior dimensions: Dia Ø 1600/1700 mm Total H 3900 mm incl. gear. Height to manhole 2900 mm. Height to outlet 550 mm. Vertical stainless steel tanks - 2 pcs. identical High speed mixer. Isolated with 50 mm completed with stainless steel. Agitator 1,5 kw - Type: SKR 45/10 Manhole top. Ppjdpfx Aeigq Ekehlot 4 x cip. Brand: Stelzer. AISI 304

Condition: used, Year of construction: 2012, machine/vehicle number: DK25P, Dear Sir or Madam, We offer the following: Nominal capacity: 20 m³ Used, refurbished (ground, primed, and painted according to customer's color choice) Pedpfocl Sfbox Ahlspt Includes manufacturer's/test certificate DIN 6616-D. Material: S235JRG2 steel in steel Tank, double-walled, suitable for above-ground installation outside earthquake/flood zones. Shape: cylindrical on saddle supports Tank dimensions: Length: approx. 6,840 mm, Diameter: approx. 2,000 mm, Weight: approx. 3,500 kg Color: RAL paint, according to customer's choice Equipment: - Filling pipe 3” with TW closure (filling cap) - Suction pipe 1¼” - Dipstick and dipstick closure, tank level indicator - Vent with cap 1 ½” - Limit switch with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied loose Diesel pump Cube 70 70 l/min Hose 4 m / extendable Motor: 0.5 kW, 230 V, 4.2 A Includes tank mount, pipelines, ball valve, and check valve, installed. Optional: 80 l/min diesel dispensing unit with data recording +++++ Of course, you can also customize your tank system! We will gladly implement your color and equipment preferences to the best of our ability. All our systems are thoroughly inspected and checked by selected employees at our company. We also offer affordable delivery upon request. Inspection of our systems is possible at any time. Further tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. We also purchase existing tank systems at any time. Trade-in of existing systems is possible. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: good (used), Year of construction: 2022, Heating oil tank, 27,000 liters for heating oil/diesel – used - : Price: only €9,950 (net), ex location, emptied, cleaned and including loading! Manufacturer: Kampitz Manufacturer number: 42089 Year of manufacture: 2022 Type: Z 38 12-312 Volume at permissible fill level: 27.82 m³ Permissible filling degree: 95% Material (inside and outside): S 235JR Hazard class: FP > 55°C Permissible density: 1.0 kg/ltr. Test pressure storage area: 2.60 mWs Test pressure leak monitoring area: -0.60 bar Max. medium temperature: 50°C Medium: heating oil / diesel Pedpey I Ry Dofx Ahlept Condition: good Available: immediately Location: Bünde, NRW

Condition: like new (used), Year of construction: 2017, functionality: fully functional, tank capacity: 40,000 l, usable tank capacity: 40,000 l, total height: 7,835 mm, outer diameter: 3,000 mm, overall weight: 3,500 kg, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, manhole location: side, Equipment: cooling unit, 4 x 40 m³ Agitated Tank (Milk Tank) made of stainless steel, insulated, coolable Technical Data / Dimensions Available quantity: 4 Volume: approx. 40,000 liters Tank type: Agitated tank Condition: unused Food-grade: yes Design: vertical Internal diameter: approx. 2,950 mm External diameter: approx. 3,000 mm Cylindrical height: approx. 6,500 mm Overall height: approx. 7,810 mm Ppodjy Uciwjpfx Ahlet Depth: approx. 1 mm Specific gravity of the medium: 1 ton/m³ Operating pressure: Non-pressurized Material / Construction Material, inner lining: Stainless steel Material: V2A-1.4301 (AISI 304) Internal welds ground smooth Heating / Cooling System Heating / cooling system available Number of cooling zones: 1 Bottom: Evaporator Cooling medium: Coolant / cooling gas Operating pressure: 18.6 bar Notes: Each tank has a cooling unit with direct evaporation (12 kW), which must be connected to the tank's cooling circuit. The unit was designed for cooling from 20°C to 4°C at an ambient temperature of 32°C. The cooling gas was evacuated during disassembly; the units will be supplied loose with the tanks. A specialized HVAC company is required for the connection and recommissioning of the cooling units and the cooling circuit of the tanks (not included in the purchase price)! Insulation Insulation available Insulation thickness: approx. 50 mm Insulation material: PU foam Material, insulation jacket: Aluminum Insulation jacket: screwed/riveted Notes: Cladding made of aluminum trapezoidal sheet, painted in RAL 9006 (white aluminum) Equipment Base design: Base ring / stand ring Quantity: 1 Mounting: fixed Top bottom: Conical bottom Bottom: Conical bottom Top: 1 x agitator connection incl. agitator 2 x lifting lugs 1 x snow guard 2 x connection for tank cleaning (CIP) 1 x inspection opening (approx. 400 mm) with closure 1 x threaded nozzle NW 65 for ventilation device Shell: 1 x manhole, oval (approx. 340 x 440 mm) 1 x sampling valve 1 x Rainbow cleaning system (automatic) incl. dosing pumps, control unit and control cabinet 1 x Insulated control room (attached) made of sandwich panels with lockable door (dimensions: approx. 1,940 x 1,640 x 810 mm) 1 x cleaning line Various connections for measuring and control technology Bottom: 1 x drain DN 80 Notes: The system consisting of 4 tanks is currently connected to each other with a central walkway. The walkway and the associated, two-section access ladder are available as an option. Agitator Agitator available Type of agitator: Paddle agitator Classification: Slow-speed Quantity: 1 Installation: from above Speed: 24 RPM Number of agitator levels: 3 Length of agitator elements: approx. 500 mm Bottom bearing for agitator shaft available Notes: Agitator designed for homogenizing milk fat (slow-rotating agitator motor with 24 revolutions / minute) Documentation Drawing

Condition: new, Year of construction: 2023, Tank & Environmental Protection Wozniack – Certified Company according to the Water Resources Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil/diesel/HVO100. Color: RAL 7035 Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/type plate according to EN 12285-2, Ü marking Tank suitable for above-ground installation outside of earthquake/flood zones. Equipment/fittings: Manhole 600 mm with manhole cover, screws, and gasket 1.1 Equipment/fittings: Manhole 500 mm with manhole cover and gasket 1 -Filling pipe 2" with TW closure (filling cap) (from 20 m³ = 3") -Suction pipe 1¼" -Dipstick and dipstick closure – tank content indicator -Vent pipe with cap 1 ½" -Limit switch with type approval -Leak detection device (optical) = LAS with leak fluid -Access ladder with platform for side mounting, supplied separately Sincerely, from Warstein Tank and Environmental Protection Wozniack Pedpfoh Ukupox Ahljpt Enkerbruch 2 59581 Warstein

Condition: new, functionality: fully functional, tank capacity: 700 l, usable tank capacity: 700 l, total length: 1,000 mm, total width: 1,200 mm, total height: 1,470 mm, overall weight: 187 kg, wall material: stainless steel, wall thickness: 1 mm, number of chambers: 1, manhole diameter: 400 mm, manhole location: top, We offer this new Thielmann KB5-GGU storage tank silo, made of stainless steel. These are new, unused stainless steel bulk material silos. Liquid-tight Diameter of manhole: 400 mm Diameter of outlet: 250 mm (DN 25) Minimum wall thickness: 1.5 mm Filling volume: 700 L Net weight: 187 kg Stackable (load capacity 1710 kg) Made entirely of stainless steel with a slide valve. Total: 400 units available Podpfey Aft Uox Ahlopt If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Several 150 m³ steel storage tanks (extinguishing water tanks) located underground Volume: 150,000 litres diameter: approx. 3.000 mm length: approx. 22.500 mm Podjfnh Tgspfx Ahlopt Weight: approx. 28,000 kg The tanks are converted to underground extinguishing water tanks according to DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bitumen exterior coating by us at the factory. - if required, we can provide the tank with a full bitumen-based interior coating (against corrosion) or epoxy resin interior coating A cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, you will then immediately receive the exact freight costs. An inspection is possible at any time by prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth (a) barth-tank. de

Condition: excellent (used), Used GRP flat-bottom wine tanks with two chambers and approx. 2% slope to the outlet capacity approx. 81.000 ltr. diameter approx. 3.000 mm Ppedog T Tgxjpfx Ahljt total height approx. 11.000 mm weight approx. 1,8 t Tank with upper vaulted bottom tank divided into 2 chambers, upper chamber 54.000 ltr., lower chamber 27.000 ltr. Equipment per chamber: 1 manhole 310 x 440 1 discharge connection flanged DN 65 1 vent connection flanged DN 50 1 flanged connection DN 50 for agitator 1 connection piece 3/8" for test cock otherwise according to sketch

Condition: excellent (used), 12 x GRP storage container Volume: 65,000 liters Ppsdpfohzt N Nox Ahlst Diameter: 3.500 mm length: 7.800 mm Weight: approx. 2.500 kg Final storage medium: vinegar (food) Type: Cylindrical with flat bottom Connections: 1 x manhole oval 1 x residual drain 1 x discharge connection

Condition: used, water tank capacity: 40,000 l, V2A stainless steel tank, upright, wine tank/fruit juice tank, Rieger - used - Volume approx. 40,000 liters Diameter approx. 2,800 mm cyl. Height approx. 5,800 mm Total height approx. 7,400 mm Weight approx. 1,000 kg Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Central threaded weld-on connection DN 100 to DN 40 with threaded connection DN 50 with vent valve DN 50 and check valve DN 50 Sprinkling ring Pedjwlg Dajpfx Ahlspt Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 1 ladder hook at the top Immersion stem sleeve for temperature display Downwardly extending CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line CIP ball Underbody: Torispherical bottom Floor-mounted bottom bead with DN 50 angled-seat valve, flush with tank wall Floor-mounted outlet with butterfly valve/ball valve/angled-seat valve, DN 50 outlet pipe with flange Five spherical feet, height-adjustable, with washers Otherwise, as per photos

Condition: used, water tank capacity: 20,350 l, Rieger V2A stainless steel vertical wine/fruit juice tank - used - Volume approx. 20,350 liters Diameter approx. 2,000 mm cyl. Height approx. 6,000 mm Total height approx. 7,400 mm Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Central threaded weld-on socket DN 100 to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 and check valve DN 50 Sprinkling ring Tank cylinder: Level indicator with bar, scale, and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 1 ladder hook at the top Immersion stem sleeve for temperature display Downwardly extending CIP line with vent line DN 40 with connecting thread DN 50 Ppjdswlg Hnepfx Ahlet Clear drain with angled seat valve DN 50 Cooling line CIP ball Bottom end: Torispherical head to Front-drawn bottom rim with DN 50 angle seat valve, flush with the tank wall Front-drawn outlet with butterfly valve/ball valve/angle seat valve, DN 50 outlet pipe with flange 4 height-adjustable spherical feet with washers Otherwise, as per photos

Condition: good (used), Insulated, heatable/coolable, cylindroconical, stainless steel fermentation pressure tanks (former beer storage tanks) standing on steel base ring - used - (tank with papers) capacity approx. 100.000 ltr. operating pressure: 1 bar inner diameter approx. 3.900 mm outer diameter with insulation approx. 4.100 mm cyl. height approx. 9.365 mm total height approx. 13.580 mm weight approx. 12,640 kg vessel with upper cone bottom and lower cone Vessel shell and cone provided with cooling zones. Cooling zones jacket designed for 0.4 bar Cooling zones cone designed for 0.5 bar Psdpfx Ahef Iylyolopt Complete vessel approx. 100 mm foamed with PU foam, with galvanized, screwed cover plate (plate may have to be replaced) Connections: on top bottom in the middle: 1 flanged connection piece NW 500 with pulled-down CIP line DN 80 1 venting spigot DN 200 on the jacket: Connection flanges NW 50 for coolant inlet and coolant outlet at the cone: 1 manhole 450 x 350 mm Cone tip ends in an outlet connection DN 100 otherwise according to drawing + photos

Condition: used, water tank capacity: 30,250 l, Upright stainless steel container made of V2A, wine/fruit juice tank with 3 cooling plates, partly with digital temperature measurement - used - Volume approx. 30,250 liters Diameter approx. 2,500 mm Cylindrical Height approx. 5,600 mm Total height approx. 7,200 mm Ppjdpfxjwlg E Rj Ahlet Outer surface: marbled Inner surface: 2B=IIIC ground Top end: Torispherical head 2 crane eyes Threaded weld-on socket DN 100 centrally connected to DN 40 with threaded socket DN 50 with fermentation lock valve DN 50 with check valve DN 50 Sprinkling ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN 15 Manhole 420x320 mm Test tap DN 15 Ladder hook at top Immersion stem sleeve for temperature display Downwardly drawn CIP line with vent line DN 40 with connecting thread DN 50 Clear drain with angled seat valve DN 50 Cooling line CIP ball Bottom end: Torispherical head to Front-drawn floor sill with DN 50 angled seat valve and DN 50 outlet pipe with flange 4 spherical feet, height-adjustable, with washers Available quantity: 24 Otherwise, see photos

Condition: used, Exterior dimensions: Diameter Ø 2500 mm, total height 6500 mm. Vertical, insulated stainless steel tanks – 4 pcs./identical Used 21,500 L, conical bottom with 3" outlet. Conical top with CIP. Insulated with 50 mm, completed with aluminium trapezoidal plates. Cooling/heating jacket in the lower part of the cylinder. Brand: Gjettermann & Nielsen A/S Pedpfsuixi Esx Ahlopt AISI 316.

Condition: excellent (used), Cold gasifier for the storage of cryogenic gases (including argon, helium, hydrogen, nitrogen and oxygen). These are 15 vacuum-insulated, double-walled pressure vessels. Manufacturer: Messer Griesheim Model: ST 36 Volume: 3.557 ltr. Operating overpressure: 18 bar / outside vacuum Pjdpfx Aspgf Rqshlspt Test pressure: 24,7 bar Operating temperature: -196°C Material: 1.5662 (steel) Dimensions: Height: 3,500 mm Diameter (inside): 1.300 mm Diameter (outside): 1,800 mm Empty weight: 2.700 kg Incl. complete technical pressure vessel documentation

Condition: used, 100 m³ buffer tank made of steel, horizontal, in a frame Volume: 100,000 ltr Dimensions (LxWxH): 15,400 mm x 3,500 mm x3,500 mm Insulation: 100 mm mineral wool, on all sides Wall construction: Insulated walls, painted in RAL 9002 Ppjdotv Rp Hepfx Ahljt Operating pressure: 3.0 bar Test pressure: 4.5 bar Connections: 1 x manhole for inspection work 1 x connection piece (supply and return (boiler)) 1 x connection piece (flow and return (consumer)) 2 x PT 100 temperature sensors

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 24,400 l, total height: 5,115 mm, inner diameter: 2,900 mm, outer diameter: 3,100 mm, overall weight: 4,500 kg, wall material: stainless steel, wall thickness: 4 mm, wall structure: double-walled, number of chambers: 1, operating temperature: 40 °C, operating pressure: 3 bar, Equipment: CE marking, Stainless Steel Pressure Vessel (Beer Tank), Insulated, Temperature-Controlled Technical Data / Dimensions Available units: 1 Volume: approx. 24,400 liters Type of vessel: Pressure vessel Condition: factory new Food-grade: yes Construction: vertical, standing Notes: Beer tank / Beer pressure tank Internal diameter: approx. 2,900 mm External diameter: approx. 3,100 mm Cylindrical height: approx. 2,900 mm Total height: approx. 5,115 mm Shell thickness: approx. 4 mm Weight: approx. 4,500 kg Specific gravity of medium: 1 t/m³ Operating pressure: overpressure Maximum operating overpressure: 3.00 bar Test pressure: 4.30 bar Bottom wall thickness: approx. 8.0 mm Top wall thickness: approx. 8.0 mm Shell/cylinder wall thickness: approx. 4 mm Floor clearance: approx. 430 mm Material / Properties Inner shell material: stainless steel Material grade: V2A-1.4301 (AISI 304) Double jacket material: stainless steel Legs material: stainless steel Outer surface: mill finish, IIB Inner surface: 2B mill finish Internal weld seams ground Notes: Tank ends (heads) internally ground, Ra < 0.8 µm Heating / Cooling System Heating / cooling system included Number of cooling zones: 4 Cylinder: Pillow Plates / Thermoplate (outside) Bottom head: Pillow Plates / Thermoplate (outside) Cooling medium: glycol Operating pressure: 4 bar Operating temperature: -10 / +40°C Double jacket volume: approx. 61 liters Heat / cooling surface area: Bottom head: approx. 3 m², Cylinder: 3.2 + 12.1 + 5.6 m² Heating / cooling system material: V2A-1.4301 (AISI 304) Insulation Insulation included Insulation thickness: approx. 100 mm Insulation material: perlite Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Equipment Supporting form: legs Number: 4 Fixing: fixed Height-adjustable legs Top end: torispherical (Klöpper) head Bottom end: torispherical (Klöpper) head Top head: 2 x crane lugs 1 x threaded nozzle DN 100 (for vacuum valve) 1 x threaded nozzle DN 80 (for cleaning, venting, and valve combination (RLV)) 1 x welded socket DN 65 (pressure measurement) 1 x thermowell TM251 (temperature measurement) 1 x ladder bracket Shell: 1 x sanitary manway (350 x 450 mm) with swing arm 1 x cable conduit DN 10 to manway 1 x CIP line DN 50 1 x threaded nozzle DN 10 (sampling) Bottom head: 1 x outlet DN 50, extended to the front in threaded nozzle DN 50, terminating Ppjdpfxoy Sb Hvs Ahlet 1 x welded socket DN 65 (pressure measurement) Notes: Tank is unused and in original packaging. Documentation Drawing Test certificate CE declaration of conformity Parts list Material certificates